Contact Us

Filter Back

Print a Spec Sheet

Duraseal® Warm-Edge Spacer

Duraseal® is a warm-edge spacer system ideal for high-volume production of dual- and triple-pane insulating glass. It has demonstrated proven performance for many years, and as a preassembled solution combining spacer, sealant and desiccant, it’s a high-performance window spacer system that you can count on for more efficient production and customer satisfaction.

Duraseal glass spacers require heat and minimal compression for efficient handling and production and are compatible with modern manufacturing equipment to take your production to the next level.

Technical data

  • Composite laminating technology
  • Lower conductivity polymeric construction
  • Black or gray sightline
  • Proven adhesive technology
  • Optimized packaging
  • Sizes to accommodate airspaces of ¼” (6 mm) to 13/16″ (20.5 mm)

Benefits

  • Smooth surface appearance
  • Superior argon gas retention
  • Improved condensation resistance

IG Systems Product Literature

Safety Data Sheet

Additional Product Information

The following information is published as general information only. The listed properties and performance characteristics are approximate values and are not part of the product specification.

PerformanceNorm
Thermal Conductance (Klin) 0.32 W/m °C based on ½" (13 mm) spacer
Moisture Vapor Transmission Rate 0.09 g H20/m2 per 24 hrs. ASTM F 1249
Volatile Fogging PassesASTM E 2189 CGSB 12.8
Argon Permeance 6-8 c.c/100 in.2 per 24 hrs.ASTM D 1434
Bondline Adhesive UV Resistance Excellent
Dew Point Development -20 °F (-29 °C) in 48 hrsASTM E 546
Tensile Strength 50 psiTST 389C

This page was last updated on December 16, 2022. Downloaded document versions may differ. Please check the individual documents for most current version.

Scroll to Top