Filter Back
Print a Spec Sheet
Duraseal® Warm-Edge Spacer
Duraseal® Warm-Edge Spacer for Doors is a system ideal for high-volume production of dual- and triple-pane insulating glass. It has demonstrated proven performance for many years, and as a preassembled solution combining spacer, sealant and desiccant, it’s a high-performance window spacer system that you can count on for more efficient production and customer satisfaction.
Duraseal glass spacers require heat and minimal compression for efficient handling and production and are compatible with modern manufacturing equipment to take your production to the next level.
Technical data
- Composite laminating technology
- Lower conductivity polymeric construction
- Black or gray sightline
- Proven adhesive technology
- Optimized packaging
- Sizes to accommodate airspaces of ¼” (6 mm) to 13/16″ (20.5 mm)
Benefits
- Smooth surface appearance
- Superior argon gas retention
- Improved condensation resistance
IG Systems Product Literature
Safety Data Sheet
Additional Product Information
The following information is published as general information only. The listed properties and performance characteristics are approximate values and are not part of the product specification.
| Performance | Norm |
|---|---|
| Thermal Conductance (Klin) 0.32 W/m °C based on ½" (13 mm) spacer | |
| Moisture Vapor Transmission Rate 0.09 g H20/m2 per 24 hrs. | ASTM F 1249 |
| Volatile Fogging Passes | ASTM E 2189 CGSB 12.8 |
| Argon Permeance 6-8 c.c/100 in.2 per 24 hrs. | ASTM D 1434 |
| Bondline Adhesive UV Resistance Excellent | |
| Dew Point Development -20 °F (-29 °C) in 48 hrs | ASTM E 546 |
| Tensile Strength 50 psi | TST 389C |
Related products
This page was last updated on August 28, 2024. Downloaded document versions may differ. Please check the individual documents for most current version.