Mikron AW-Rated Door System C3-11300™

11300-460-258-(1).jpg

Ideal for use in mid- and high-rise commercial buildings

AW-rated commercial door system with patented dual co-extruded SuperCapSR™ color technology developed for use in mid- and high-rise commercial buildings. Ideal for both new construction and replacement applications throughout North America.
 

Dual Co-Extruded SuperCapSR™ Color Options (Interior/Exterior)

SuperCapSR™ dual co-extruded color technology, for both interior and exterior profile surfaces, was born from military infrared reflective technology. Patented, co-extruded colorant system creates a molecularly fused color layer that becomes an integral part of the profile and helps absorb less heat, to prevent heat-related profile distortion. SuperCapSR is Florida, Arizona and Kentucky field weather tested and meets AAMA 614 color-hold standard.

 

  • Single & Multi-panel in-swing door with ADA sill
  • Single & Multi-panel out-swing door
  • Fixed transom, fixed side lites
  • Concealed face mull grooves
  • SuperCapSR™ – split cap
  • Standard hardware from all major suppliers: Roto, Siegenia, HTL & others
  • 1-5/8” glazing pocket
  • Interior or exterior glazed
  • Triple weather-seal gaskets
  • Center seal
  • Large reinforcing cavities
  • 3.25” (83 MM) base frame width
  • Vinyl frames resist condensation, reducing risk of water damage to building interiors frame and sash hollow compartments allow for optimal reinforcement required in heavy commercial applications
  • Fusion welded corners provide environmental comfort and protect against leaks
  • Multiple locking points and triple weather seals provide superior air tightness
  • 3-1/4” (83 MM) base frame width ideal for new construction and replacement
  • Accommodates up to 1-5/8” (42mm) insulating glass unit to maximize thermal efficiency and acoustic performance
  • Interior and exterior glazing option for versatility
  • Accommodates multiple reinforcing material options, for higher structural performance and thermal efficiencies
  • .100” (2.5mm) main wall thickness; optimized for structural strength
  • In triple-pane configurations the system is designed to achieve well below NFRC .20 U-Factor with CR over 75
  • 20.1 sq. ft. daylight opening without sacrificing max. thermal performance
  • Addresses the need for an optimal mix of strength, energy performance and aesthetics for mid- to high-rise buildings
  • Integral interior and exterior perimeter accessory groove
  • T-bar for mulling and stacking
  • Continuous compression weather seal on frame and sash
  • True ADA sill option
  • Patented dual co-extruded SuperCapSRTM color technology on interior and exterior surfaces
  • Center seal to protect hardware
  • Accepts standard multi-lock hardware