Decoseal® for decorative glass

Decoseal® is a warm-edge spacer system designed specifically to accommodate and support a center lite of glass or decorative panel, thereby reducing the assembly steps necessary in the fabrication process of triple glazing.

Decoseal is an all-in-one spacer system that features:
  • Concentrated desiccant layer
  • Thermally broken-edge-seal system
  • A low profile to accommodate secondary sealing or structural reinforcement in large lites
  • Imprint for product authenticity
  • Optimized packaging
  • Variety of sizes and options to accommodate different airspaces:
  • GrooveGroove Width (inches)Groove Depth For Airspaces under 1/2"(12.7mm)Groove Depth For Airspaces 1/2" and over (12.7mm)
    T0.176" (4.47 mm) target0.125" (3.2 mm)0.140" (3.6 mm)
    U0.220" (5.59 mm) target0.125" (3.2 mm)0.140" (3.6 mm)
    W0.280" (7.11 mm) target0.125" (3.2 mm0.140" (3.6 mm)
Decoseal provides efficiency in the fabrication of decorative panes. Additional benefits:ion for efficient handling and production. Other benefits:
  • Four times more efficient than aluminum spacer bar
  • Rapid dew point development
  • Low moisture vapor transmission rate
  • Reduces the risks associated with conventional methods of triple fabrication
  • Easily incorporated with high-performance glass and gas options
The following information is published as general information only. The listed properties and performance characteristics are approximate values and are not part of the product specification.
Moisture Vapor Transmission Rate 0.02-0.03 g H20/100 sq. in. per 24 hrs. for a .020” (.51 mm) film at 100° F (38° C).ASTM F 1249
Volatile Fogging PassesASTM E 1887 HIG E 2189 CGSB 12.8
NormASTM D 1434
Argon Permeance 6-8 cm3/100 in.² per 24 hrs. per atmosphere as measured on a .040” (1.02 mm) film at 77° F (25° C).
Resistance of Compression of Self-Contained Aluminum Spacer 1,300 pounds per linear foot, when compressed at rate of 2” (50 mm) per minute.
Decoseal® for decorative glass

Additional Images